Cabletron Systems DLE22-MA, User Manual

Page: 131 / 202

Module Specific Configuration Menu Screen
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-67
5.20.4 Displaying the SmartTrunk Ports
There are three SmartTrunk screens. Each screen displays 12 ports. The
NEXT and/or PREVIOUS command is displayed at the bottom of the
screen, allowing the user to navigate to either the next or previous screen.
To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER and the next screen of entries is displayed.
To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries in the previous screen.
5.21 MODULE SPECIFIC CONFIGURATION MENU
SCREEN
The Module Specific Configuration Menu screen, Figure 5-26, allows the
user to select one of five screens to configure ports or check system
resources specific to the DLE2X-MA and DLE3X-MA.
Access the Module Specific Configuration Menu screen from the Module
Configuration Menu screen by using the arrow keys to highlight the
MODULE SPECIFIC CONFIGURATION MENU menu item and
pressing ENTER. The Module Specific Configuration Menu screen
displays.
The following menu items on the Module Specific Configuration
Menu screen may not display if the operational mode of the
module has been set to 802.1Q SWITCHING:
PORT REDIRECT FUNCTION
BROADCAST SUPPRESSION
Refer to your Release Notes to see if the functionality provided
by the above screens is supported.
Section 5.15.9 provides instructions on setting the operational
mode.