Cabletron Systems DELHF-UA, User Manual

Page: 39 / 92

DELHF-UA User’s Guide 3-1
CHAPTER 3
LOCAL MANAGEMENT
This chapter provides instructions on configuring the DELHF-UA to
operate in full duplex FDDI mode, viewing DELHF-UA FDDI statistics,
translating specific FDDI frame types to specific Ethernet frame types
and to viewing the FDDI ring topology using Local Management.
Make sure that the following requirements have been met before
configuring the DELHF-UA through Local Management:
• At least one FPIM is installed in the DELHF-UA.
• The DELHF-UA is installed in the host interface module or standalone
hub.
• The device is up and running.
• A Local Management terminal is properly configured and connected
to the host interface module or standalone hub in which the
DELHF-UA resides.
When installed, the DELHF-UA provides additional Local
Management features. These features are accessed by
entering Local Management of the host interface module or
standalone hub. Refer to the host device User’s Guide to
establish a Local Management connection.
If the DELHF-UA is being configured to operate in full duplex
mode, two FPIMs must be installed before proceeding.
To view DELHF-UA FDDI statistics and ring topology, the
DELHF-UA must be connected to the FDDI ring.