QUICK START
18 CyberSWITCH
requested to complete the line configuration will depend on the line type. The following
summarizes the information requested for each line type and the most common responses.
For Basic Rate:
•
If you have a 4 port basic rate adapter, configure all basic rate lines at this time (up to four
lines)
•
select point-to-point for the interface type
•
add a data link (two for DMS and NI-1 switch types)
•
use Automatic TEIs for these data links
For Primary Rate:
•
ESF is the most common framing type
•
B8ZS is the most common line coding type
•
chose common-channel as the signaling type
•
select the length of the line from the CSU to the CyberSWITCH as line build out
5.
If you are using any accesses besides switched accesses (such as dedicated accesses, frame relay
or X.25) configure the access now. Select Access. Select the type of access you wish to configure.
Follow the on-screen instructions to complete the configuration.
Note:
Frame relay and X.25 accesses are available only if you have purchased the additional
software module for packet switched accesses.
The initial configuration steps on the CyberSWITCH are now complete. Press <return> repeatedly
until you return to the main CFGEDIT menu. Continue with the
Connectivity
section to complete
remaining configuration steps.
