B-2
Repeater MIM
Appendix B:
EPIM Specifications
EPIM-F1 and EPIM-F2
The EPIM-F1 and EPIM-F2 support Multimode Fiber Optic cabling. Each EPIM
has an internal Cabletron Systems FOT-F™ Fiber Optic Transceiver. The EPIM-
F1 is equipped with SMA Connectors and the EPIM-F2 is equipped with ST
Connectors. Figure B-2 shows both EPIMs. Specifications for the EPIMs are
listed below.
Figure B-2. EPIM-F1 and EPIM-F2
Parameter
Typical
Worst
Worst Case Typical
Value
Case
Budget
Budget
Receive
Sensitivity
-30.5 dBm -28.0 dBm
—
—
Peak Input
Power
-7.6 dBm
-8.2 dBm
—
—
Transmitter Power
50/125
µ
m
fiber
-13.0 dBm -15.0 dBm 13.0 dB
17.5 dB
62.5/125
µ
m
fiber
-10.0 dBm -12.0 dBm 16.0 dB
20.5 dB
100/140
µ
m
fiber
-7.0 dBm
-9.0 dBm
19.0 dB
23.5 dB
Error Rate
Better than 10
-10
Summary of Contents for CXRMIM
