MONITORING AND TROUBLESHOOTING
4-4
•
Verify that STP and UTP connectors (DB9 and RJ45) are pinned
properly. For fiber, verify that the receive-to-transmit connection of
strands between devices is correct.
•
Check that the connection meets the dB loss limit and media
specifications outlined in Appendix B.
•
Check that the BRIM-T6 port is enabled through Local Management.
Contact Cabletron Systems Technical Support if you still cannot establish
a network link.
Summary of Contents for BRIM-T6
Page 1: ...BRIM T6 USER S GUIDE ...
Page 2: ......
Page 14: ...INTRODUCTION 1 6 ...
Page 26: ...CONNECTING TO THE NETWORK 3 4 ...
