7
9E106-06 Module Specific Information
Port Redirect Function Screen
The 9E106-06 Port Redirect Function Screen (Figure 2),, allows you to set each one
of the ports as a source or destination port. You can set a port to have one or more
destination ports. For example, you can set port 1 as a source port with three
destinations: ports 2, 3, and 4. Traffic from port 1 is then automatically redirected
to ports 2, 3, and 4. Port 1 can also serve as a destination port for other ports.
There can be more than one Port Redirect Function screen depending on the
number of port redirect entries. Each screen displays up to 10 port redirect entries.
If there is more than one screen of redirect entries, the
NEXT
and/or
PREVIOUS
command is displayed at the bottom of the screen, allowing you to navigate to
either the next or previous screen.
For example, with three screens of entries, the
NEXT
command
displays at the
bottom of the first screen. In the second screen, the
NEXT
and
PREVIOUS
commands are displayed. In the last screen, only the
PREVIOUS
command is
displayed.
Figure 2. 9E106-06 Port Redirect Function Screen
SmartSwitch 9000 LOCAL MANAGEMENT
Port Redirect Function
Module Name: 9E106-06 Firmware Revision: 2.00.03
Slot Number: 5 BOOTPROM Revision: 01.02.02
Source Port Destination Port
-- --
-- --
-- --
-- --
-- --
-- --
-- --
-- --
-- --
-- --
Source Port [ 1] Destination Port [ 1] Status [ADD]
SAVE RETURN
