9E106-06 Module Specific Information
2
FNB Resource Configuration Codes
The 9E106-06 Ethernet Module provides connectivity between seven interfaces:
the six front panel Ethernet interfaces and the FDDI rings on the backplane (FNB-
1 or FNB-2).
The FNB Resource Configuration Screen allows you to connect the module’s front
panel Ethernet interfaces to one of the chassis’ two FDDI networks (FNB-1 or
FNB-2) via a bridge/switch.
The FNB Resource Configuration Screen lists all the possible connections that the
specified module can support on the FNB, displays the current connection, and
allows you to change the connection. Table 2 lists and describes the FDDI
Connections from which you can select.
Table 2. FNB Resource Configuration Codes
Configuration
ID
FDDI
Connections
Description
1
NORING <-> ENET
Neither the FNB-1 nor the FNB-2 on the
chassis’ backplane is connected to the
module’s bridge/switch.
2
FNB1 <-> ENET
The FNB-1 on the chassis’ backplane
and the module’s Ethernet interface(s)
are connected to the same
bridge/switch.
3
FNB2 <-> ENET
The FNB-2 on the chassis’ backplane
and the module’s Ethernet interface(s)
are connected to the same
bridge/switch.
