Repeater Level Security Configuration
6E123-50 and 6E133-49 User’s Guide
5-87
5.26
REPEATER LEVEL SECURITY CONFIGURATION
The Repeater Level Security Configuration screen,
Figure 5-32
, is used to
set the state of security for all ports on a connector. A connector can be set
to receive all frames (NonSecure state), lock on the source address of the
next frame received (LockOnNext), or lock on the source address of the
last frame received (LockedOnAddr). When either of the last two options
are set, upon the detection of an intruder, the switch can be set to receive
or not receive frames and to send or not send traps.
To access the Repeater Level Security Configuration screen, use the arrow
keys to highlight the REPEATER LEVEL SECURITY
CONFIGURATION menu item on the Repeater Configuration Menu
screen and press ENTER. The Repeater Level Security Configuration
screen displays.
Figure 5-32
Repeater Level Security Configuration Screen
6E123-50 LOCAL MANAGEMENT
Repeater Level Security Configuration
Module Type: 6E123-50 Firmware Revision: XX.XX.XX
Slot Number: X BOOTPROM Revision: XX.XX.XX
Interface State Lock/Learn Action On Intruder
1 [Secure] [LockOnNext]
[DisablePort]
[SendTrap]
2 [Secure] [LockOnNext]
[DisablePort]
[SendTrap]
3 [Secure] [LockedOnAddr]
[DisablePort]
[SendTrap]
4
[NonSecure]
SAVE EXIT RETURN
27461_112
