Cabletron Systems 5000, 5500, Manual

Page: 62 / 83

9032208 E4 Application View
5-5
Device Application View
Catalyst Stack Application
Catalyst Stack Application
The Catalyst Stack application supported by the Cisco Catalyst Hub is
modeled in SPECTRUM with the CATStackApp Model Type.
Table 5-1
describes each of the application-speciÞc Icon Subviews menu selections
available for the Catalyst Stack application.
BRouter Information
To access the BRouter Information view, do the following:
1. Within the Application view, highlight the Catalyst Stack Application
icon.
2. From the Icon Subviews menu, select Bridge/Router .
Table 5-1. Catalyst Stack Application-SpeciÞc Icon Subviews Menu Selections
Menu Selection Description
ConÞguration Opens the Catalyst Stack ConÞguration view ( Page 3-4 ).
Bridge/Router Opens the BRouter Information view ( Page 5-5 ).
Community Strings Opens the Community Strings View ( Page 5-8 ).
FDDI Ring Opens the FDDI Ring Table ( Page 5-9 ).
Filter Opens the Catalyst Filter Tables ( Page 5-10 ).
Monitor Opens the Monitor Information View ( Page 5-13 ).
TFTP Opens the Catalyst TFTP Information View ( Page 5-14 ).
Trap Receiver Opens the Catalyst Trap Receiver Table ( Page 5-15 ).
VLan Opens the Catalyst VLan Table ( Page 5-16 ).
VLan Ports Opens the VLan Ports Table ( Page 5-16 ).
VLan_ConÞgure Opens the Catalyst VLan Manager , ( page 5-16 ) which
allows you to add or remove VLANs and change the VLAN
conÞguration of each port.
Model Information Opens the Model Information view described in the
SPECTRUM Views reference.