Owner’s manual
38
EN
Remote control does not
work
The device is turned off
Turn on the device
The remote control is not
pointed at the device
Point the remote control
at the device no more
than 8 meters from
the remote control
sensor and within 30°
horizontally and 30°
vertically of the front of
the unit
There are obstacles
between the remote
control and the device
Make sure there are no
obstacles between the
remote control and the
device
The batteries are
discharged
Replace the batteries
with the new ones
Forgotten channel
password
Delete locked channel
and scan channels again
When the device is
moved to another room,
there is no signal
Antenna connection
in new place may be
different (lower signal
strength resulting
in weaker channel
reception or no signal)
Check antenna connec-
tion or connect amplifier
to the antenna
SPECIFICATION
CPU: Ali3821P
Internal memory: 32 Mb
RAM: 512 Mb
Antenna connector: IEC-Female
Loop output: IEC-Male
Input frequency range: (VHF) 174~230 MHz; (UHF) 470~862 MHz
Modulation: QPSK, 16QAM, 64QAM
Bandwidth: 7 MHz, 8 MHz
Decoding: MPEG-1, MPEG-2, MPEG-4, H.264, AAC, HE-AAC, AC-3, DD+