5G CPE User Manual
Page 5 , Total 25
sending rate. If AP and Station can reach to 40MHz channel bandwidth, max sending rate can
reach to 300Mbps, and throughout rate can improve more than twice.
Station status box shows CPE working as Station Mode.
Up/Down:
UP means CPE has successfully connected with AP. Down means that CPE has not
SSID:
SSID name of AP that CPE is connecting
；
BSSID:
BSSID address of AP that CPE is connecting
；
Signal Strength:
signal strength of AP that CPE is connecting
；
Signal strength is negative, the
smaller the absolute value of signal strength, the stronger it proves between CPE and AP. When it
transmits in long distance, stronger signal can ensure higher thorough for wireless transmission.
Security:
security way of AP that CPE is connecting, CPE supporting None/WEP/WPA-
TKIP/WPA-CCMP/WPA2-TKIP/WPA2-CCMP/WPA
mix encryption
and WPA2
mix encryption
connecting AP
。
Wireless1/2/3/4 status box shows CPE working as AP Mode. 5G CPE supports at
most 4 wireless services, representing Wireless1/2/3/4.
Up/Down:
UP means interface of wireless service has started to work, and is providing wireless
access services. And down means it has not.
SSID:
SSID of wireless service
；
BSSID:
BSSID of wireless service broadcast Beacon using
Security:
security way of wireless service using, supporting None/WEP/WPA-TKIP/WPA-
CCMP/WPA2-TKIP/WPA2-CCMP/WPA
mix encryption
and WPA2
mix encryption
；
Asso number:
asso number of current wireless service.
3.1.2 NETWORK Page
Figure 3-2, mainly shows current network working mode and network
parameter
.
