5G CPE User Manual
Page 19 , Total 25
MTU/MRU:
used for setting MTU and MRU PPPoE negoiation
；
Encryption:
used for setting MPPE Agreement when“enable” or “to enable” PPPoE negoiation is using
（
Microsoft Point-to-Point Encryption Agreement
）
；
NAT
：
used for setting NAT service of “enable” or “to enable”CPE
；
NAT Protocol
：
For some NAT service of special agreement, it needs to enable alone, CPE supporting NAT
service of SIP
、
RSTP
、
FTP and PPTP.
3.
LAN Network Settings
IP address:
used for setting IP address of management devices
；
Netmask:
used for setting netmask of IP address
；
DHCP Server:
used for “enable” or “to enable” DHCP Server function, the default is “to enable”state
；
Range Start:
used for setting range start IP address of DHCP Server address pool
；
Range End:
used for setting range end IP address of DHCP Server address pool
；
Netmask
：
used for setting netmask of DHCP Server address field
；
Lease Time:
used for setting lease time DHCP Server assigned address
；
DNS Proxy:
used for “enable” or “to enable” DNS proxy function.
3.5
SERVICES Page
Services Page is used for setting safe access, access management and so on, as Figure 3-19.
