www.cablematters.com
4
USB 2.0 Extender over Ethernet
3.3 Receiver Panel Connections
3.4 Connection Instructions
1. Power off all the source and sink devices
2. Connect the Transmitter to your computer with the USB-B cable included in the package
(look for a green LED on the Transmitter)
3. Connect the Transmitter and Receiver via a network cable
4. Connect the USB devices and power adapter to the Receiver
5. Plug the Receiver power adapter into an AC outlet (look for a green LED on the Receiver)
6. Power on all the equipment and check for the USB devices in the computer
Note:
•
Test all the equipment and cables before installing permanently
1)
USB2.0 Port
: Connect various USB devices to achieve a high transfer rate of 480Mbps.
2)
Power LED
: The Power LED indicator, marked by a green light, illuminates when a
power adapter is successfully connected to the Receiver.
3)
DC 5V
: Connect the 5V/1A DC power adapter to this port.
4)
CAT port
: Link the CAT port to the Transmitter's corresponding CAT port using CAT
5e/6 cable
