n
CROSSOVER
(located on the front): adjust the
potentiometer on a “3 AM” position.
n
VOLUME
(located on the front): the adjustment of
the volume will depend upon room positioning, type of
amplifiers… With GALLiA SYSTEM the average position is
on a “12 AM” position. For an optimum adjustment of the
volume, we advise you to carry out it starting from a stereo
source (CD). Then use the TEST TONE of your AV amplifier
to adjust the level of channel SUBWOOFER/LFE.
n
PHASE
(located on the front): usually it is necessary to
position the potentiometer on 0°, however 2 positions can
be used 0° and 180 °.
- adjust the potentiometer on 0° when the subwoofer and
the speakers are positioned at the same distance of the
listening area.
- adjust the potentiometer on 180° when the subwoofer is
positioned 5 ft (1.5m) ahead or behind the speakers.
SETTING YOUR AV AMPLIFIER
q
The table below shows the adjustments to make.
Speakers
AV amplifier
adjusting
FRONT LEFT
LARGE
FRONT RIGHT
LARGE
CENTRE
LARGE
SURROUND LEFT
LARGE
SURROUND RIGHT
LARGE
SUBWOOFER/LFE
ON
TROUBLESHOOTING
If you have a problem with your GALLiA SYSTEM, turn off
your sound source and try the solutions below. If you still
have a problem, contact your Cabasse dealer to arrange
for service.
CLEANING THE SPEAKERS
The cabinets of GALLiA speakers may be cleaned with a
soft damp cloth. Do not use any sprays near the system
or allow liquids to spill into any openings. Also, do not use
any solvents, chemicals, or cleaning solutions containing
alcohol, ammonia, or abrasives.
The grill assemblies on the speakers may be carefully
vacuumed, if necessary. Please note that the drivers are
located directly behind the grille cloth, and are easily
damaged if reasonable care is not taken.
AFTER SALE SERVICE
Cabasse retailers’ network is at your disposal to ensure
the after sale service of your material. To get the list
of Cabasse retailers, contact us or consult our web site
www.cabasse.com
.
Thanks to the above information, your GALLiA SYSTEM is
now nicely set up and we hope you will enjoy your speaker
system for many years. We receive every day letters from
customers expressing the ever growing satisfaction and
musical emotion they have been getting with our speakers
over the years. These letters are our first motivation.
Problems
• The system does not function
at all
• Not enough or too much bass
• No surround sound
Solutions
• Make sure the amplifier and the subwoofer
plugged into an operating AC wall outlet
and that the subwoofer is turned ON or
AUTO.
• Be sure that the right source is selected on
the amplifier (video, CD, DVD, tuner…).
• Check the speaker connections.
• Turn the subwoofer on ON or AUTO.
• For digital sound, be sure a coaxial or
optical cable connects the digital output of
the DVD player with the digital input of your
amplifier.
• Move the subwoofer closer to a wall or a
corner to increase very low bass frequencies.
• Move it farther away from a wall or a cor-
ner to decrease very low bass frequencies.
• Adjust the LFE level control of your AV
amplifier.
• Check that the adjustments of your AV
amplifier are correct.
