Configuration 5.1 without the Max
■
5 iO sp 1 Furio subwoofer or 2 main
sp 3 iO sp 1 Furio subwoofer
Connect each speaker output of the 5.1 amplifier directly to the
matching iO speaker (front right, front left, centre, etc.).
Connect the subwoofer CINCH RCA output of the amplifier to
one CINCH RCA LINE IN post of the subwoofer.
Then adjusts the set-up menu of your audio video amplifier:
For 5 iO speakers:
For 3 iO speakers and 2 large bandwidth front speakers:
FURIO SUBWOOFER ADJUSTMENTS
In any cases configuration 2.1 or configuration
5.1, the adjustment of frequencies CROSSOVER
FREQUENCY is positioned as follows:
The adjustment of the LEVEL will depend upon
room positioning, type of amplifier, etc. With the
Furio subwoofer, the average position of the LEVEL
control is as follows:
For an optimum adjustment of this level, we advise you to car-
ry it out starting from a stereo source (CD).
To adjust the level of the low frequency effect channel, do not
modify the sound level of the Furio subwoofer but go into the
set-up menu of your audio video amplifier 5.1 and adjust the
SUBWOOFER / LFE channel.
e
n
g
l
i
s
h
Because of technical improvements already under way in our constant search for optimum quality, Cabasse reserves the right to modify all the models
presented in specification sheets, advertising materials and manuals without prior notice.
Our web site www.cabasse.com will give you the specific adjustments we recommend for the use of our active subwoofers.
Installation
2/7 channels
caisson de graves actif
Ways
2 1
Drivers
tweeter-midrange 2 ways coaxial
modèle 21M18LB4C - 21 cm
DOM25/13F15
Crossover frequency
DOM25/13F15 à 2 700 Hz
Frequency bandwith
180 - 20 000 Hz
30 - 200 Hz
in semi-reverberating chamber
in semi-reverberating chamber
Pulsed sound pressure
114 dB
Efficiency
93 dB/2,8 v/1 m
High-pass filter
180 Hz
Nominal impedance
8 ohms
Minimum impedance
3,2 ohms
actif
Power handling
80 W
250 W
Peak power handling
560 W
750 W
Lowpass cut-off frequency
from 40 to 180 Hz
Phase switch
0 ° normal, 180 ° reverse
Input
2 low level, 2 high level
Magnetic shielding
yes -
Max Cabasse module included
yes
Voltage
115/230 V, AC - 50/60 Hz
Maximum power consumption
165 W
Diameter of the sphere
16 cm - 6.3 in
iO base version
dimensions (h x w x d)
19 x 16 x 20 cm - 7.5 x 6.5 x 8 in
37 x 26 x 37 cm - 20 x 13 x 17 in
weight
2 kg - 4.9 lb
18 kg - 40 lb
iO stand version dimensions (h x w x d)
105 x 30 x 30 cm - 41.5 x 12 x 12 in
weight
10 kg - 21 lb
iO in ceiling
dimensions (h x w x d)
26 cm de diamètre
weight
2 kg - 4.9 lb
SPECIFICATIONS iO
SPEAKER
SUBWOOFER
FURIO
TECHNICAL DATA
FRONT
SMALL
CENTER
SMALL
SURROUND
SMALL
SUBWOOFER STEREO
YES
SUBWOOFER / LFE
YES
SUBWOOFER FREQUENCY
180 Hz
FRONT
LARGE
CENTER
SMALL
SURROUND
SMALL
SUBWOOFER STEREO
NO
SUBWOOFER / LFE
YES
SUBWOOFER FREQUENCY
180 Hz
Cab notice iO 2005-07 17/11/05 11:17 Page 9
