Hand shower
Shower hose
Shower Holder
M5 Screw
Decorating Ring (small)
Put the decorating ring
onto the hand shower
seat. Connect the
shower hose with the
hand shower. Pass the
hose downward through
the shower holder to
connect with the knitted
hose. Remove the circlip
off the knitted hose and
connect the shower
holder to the hand
shower seat. Tighten
them with M5 screw.
After installation,
check if everything is
complete. The diagram
shows the default
bathtub outlet when
the handles are
turned on.
When the rod cap
is lifted, water comes
out of the hand
shower.
Spout
The spout can
rotate 360 degrees.
V. Maintenance
Spout
Filter
Inner Core
S2.5 Wrench
M5 Screw
After a period of usage, if the volume lessens, it might be due to debris from
bad quality water blocking the inner core. Loosen the M5 screw and take out
the spout and then the inner core. Clean its filter with clean water.
Then install it back.
