Bathtub Deck
Outlet
Outlet
Place the two inlet valve
bodies (red on the left
and blue on the right)
upward through the
bathtub deck with the
outlet holes facing against
each other. Tighten on the
stop collars and put on the
protection sheath.
Rubber Washer
Locking Washer
Locking Nut
Ø26 O-Ring
Ø26 O-Ring
Inlet Adapter
Washer
Hex Nut
Lift Rod
Base
Take off the following
from the lift rod base
accordingly: the hex
nut, washer, Ø26 O-
Ring, inlet adapter,
locking nut, locking
washer and rubber
washer.
Setscrew
Protection Sheath
Place the lift rod base
downward through the
bathtub deck. Then put
on the rubber washer
and locking washer,
tightened by locking nut
and setscrew. Then put
back the parts that were
dismantled before.
Remove the protection
sheath from the inlet
adapter .
Ø16 O-Ring
Connecting Rod
Connecting Nut
Ø16 O-Ring
Washer
Use the connecting rod
to connect the two inlet
valve bodies with the
inlet adapter. Tighten
the connecting nuts.
Setscrew
Tighten the locking nuts
and setscrews on the
inlet valve bodies.
Protection Sheath
Hand Shower Seat
Rubber Washer
Locking Washer
Locking Nut
Take off the locking nut,
locking washer, rubber
washer and protection
sheath from the hand
shower seat.
Circlip
Knitted Hose
Take the circlip off the knitted
hose. Put the smaller end of
the knitted hose upward
through the hand shower
seat and put back the circlip.
