6
AutoCheck
TM
mode
Set the slide-switch function selector to the
position. This innovative AutoCheck
TM
feature automatically selects measurement function of DCV, ACV or Resistance (
Ω
)
based on the input via the test leads.
●With no input, the meter displays “Auto” when it is ready.
●With no voltage signal but a resistance below 6M
Ω
is present, the meter displays the
resistance value. When below 25
Ω
(0.025k
Ω
) is present, the meter further gives a
continuity beep tone.
●When a signal above the threshold of +1.5 VDC, -1 VDC or 2 VAC up to the rated
600V is present, the meter displays the voltage value in appropriate DC or AC,
whichever larger in peak magnitude.
●Overload-Alert Feature: When above rated 600V is present, the meter displays “OL”
with a warning beep tone for over-range indication. Disconnect the test leads from the
signal immediately to avoid hazards.
Note:
●Range-Lock Feature: When a measurement reading is being displayed in
Customer Care Australia P: 13122 F: 1300 303 310 E: [email protected] W:cabac.com.au
A: Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 0800 966 969 F: 0088 6969 E: [email protected] W: cabac.co.nz
6
