MACH4
Safety and the Environment
Edition 7/06
Operator’s Manual
7
2.1
Intended Use of the Printer
•
The label printer is built in accordance with the current technological status and the recognized
safety rules. However, danger to the life and limb of the user or third parties and/or damage to the
label printer and other tangible assets can arise during use.
•
The label printer may only be used for its intended purpose and if it is in perfect working order, and
it must be used with regard to safety and dangers as stated in the operating manual. In particular,
faults which affect safety must be rectified immediately.
•
The label printer is intended exclusively for printing suitable materials that have been approved by
the manufacturer. Any other use or use going beyond this shall be regarded as improper use. The
manufacturer/supplier shall not be liable for damage resulting from unauthorized use; the user shall
bear the risk alone.
•
Usage for the intended purpose also includes complying with the operating manual, including the
manufacturer’s maintenance recommendations and specifications.
2.2
Safety Instructions
•
The label printer is configured for voltages of 100 to 240 V AC. Connect only to a power outlet with
a grounded contact.
•
The printer must only be connected to devices which have extra low voltage.
•
Switch off all affected devices (computer, printer, accessories) before connecting or disconnecting.
•
The label printer may only be used in a dry environment, do not expose it to moisture (sprays of
water, mists, etc.).
•
If the label printer is operated with the cover open, ensure that people’s clothing, hair, jewelry etc. do
not come into contact with the exposed rotating parts.
•
During the print process the print assembly can become hot. Do not touch during operation, and
allow to cool down before changing material and before disassembly.
•
Perform only those actions described in this operating manual. Work going beyond this may only be
performed by trained personnel or service technicians.
2.3
Disposal in an Eco-friendly Manner
Obsolete devices contain valuable recyclable materials that should be sent for recycling.
⇒
Send to suitable collection points, separately from residual waste.
The modular construction of the printer enables it to be easily disassembled into its component parts.
⇒
Send the parts for recycling.
The electronic circuit board of the printer is equipped with a lithium battery.
⇒
Take old batteries to collection boxes in shops or public waste disposal centers.
DANGER!
Danger to life and limb from power supply.
⇒
Do not open the label printer casing.