38
38
!
Attention!
Risk of injury from the hot printhead lines.
Ensure that the printheads have cooled down before starting cleaning.
Cleaning Steps
1. Turn off the printer.
2. Open the printer cover.
3. Remove the ribbon.
4. To remove any label residue or other dirt from the print head (see arrow), please use a soft lint-free cloth dipped in
alcohol.
7.2
Error Alerts
In the event of a problem that prevents normal functioning of the printer, you will see an error message on LCD
screen and hear some beep signals.
Status
Type
Beeps
Description
Solution
Printhead up (Open)
MACH2/200 V1.RC0
Head
Error
2 x 4
beeps
The printing mechanism is
notcorrectly closed.
Open the print mechanism and close it again.
MACH2/200 V1.RC0
Head
Error
None
High temperature at the print
head.
Once the print head has cooled down, the
printer switches to standby mode.
Check Ribbon
MACH2/200 V1.RC0
Media
Error
2 x 3
beeps
No ribbon is installed and
the printer displays an error.
Vergewissern Sie sich, dass der Druckmodus
"Thermodirektdruck" eingestellt ist.
The ribbon is finished or
the label supply hub is not
moving.
Replace the ribbon roll.
Check Media
MACH2/200 V1.RC0
Media
Error
2 x 2
beeps
No paper is detected.
Make sure that the label sensor is positioned
correctly. If the sensor still does not detect the
paper, run the auto-detection function again.
Paper is finished.
Replace the label roll.
Printer feed problem.
Possible reasons: the print medium has become
trapped around the rubber roll; the sensor
cannot detect a gap or black mark between
the labels; there is no paper. Please reset the
sensor.
MACH2/200 V1.RC0
File Error
2 x 2
beeps
The memory is full. The
printer prints the message
"File System full".
Delete unnecessary data or install additional
memory.
MACH2/200 V1.RC0
Unable to find file. The
printer prints the message
"File Name not found".
Use the "~X4" command to print all files. Then
check whether the files exist and whether the
names are correct.
