CAB M4 Operator'S Manual Download

Page: 64 / 132

cab Produkttechnik GmbH & Co KG

8. Printer Configuration

PIN Activation

- Change to the "Info" tab.

In this tab, all configuration parameters can be set.

- In the top window, open the folder "Security" and click on "PIN".

Fig. 8g Printer Web-Page "Info" - PIN Activation

- In the lower window select the setting "On". Enter a four-digit code number

(PIN) in the "New PIN" field. Repeat the input in the "Please repeat" field

and click "OK".

Changing the Parameters

After the PIN was activated, all parameters in the top window of the "Info" tab

can be modified :

- To open and close the different folders click on the [+] or [-] button.
- To modify a parameter, click on the name or symbol of the parameter you

wish to change. Once selected, the adjustment can be made in the lower

window.

- Confirm the change by clicking the OK button.

After that the PIN will be requested. Enter the correct PIN.

- If you have entered a wrong PIN three times, the Ethernet connection

must be closed and re-opened to continue the parameter changing.

Summary of Contents for M4





































































































































Search results

Summary of Contents for M4

Reviews:

Related manuals for M4

Brands by name

Popular brands

CAB M4, Operator'S Manual

Search results

Summary of Contents for M4

Reviews:

Related manuals for M4

Brands by name

Popular brands