CAB M4 Operator'S Manual Download Page 34

Page: 34 / 132

cab Produkttechnik GmbH & Co KG

5. Installation

Windows 2000/XP

1. Turn on the computer.

2. Quit any open applications.

3. Insert the "Printer Accessories CD A-Series/M-Series" into the CD-ROM

drive.

4. From the Start Menu, select Settings, Printers, Add Printer.

5. The Add Printer Wizard box will appear. Click "Next".

6. Select "Local printer" and click "Next".

7. Select from the list of available ports a COM port. Click "Next".

8. Click "Have disk". Under "Copy manufacturers files from:", type

D:\WINDRV\9X2000XP

" (where D is the letter of your CD-ROM drive).

Click "OK".

9. Double-click on the model that matches your printer. Click "Next" to

proceed.

10. Change the printers name if necessary, and decide if the new printer

should be the standard printer. Click "Next".

11. In the next screen, choose not to share the printer. Click "Next".

12. Select if you want to print a test page. Click "Finish.

13. If the message "Digital signature not found" (Windows 2000) or "Windows

logo test failed" (Windows XP) appear, click "Yes" (Windows 2000) or

"Continue" (Windows XP) to continue with the installation.

14. In the folder "Printers" the icon of the new printer appears. The installation

has finished.

Summary of Contents for M4





































































































































Search results

Summary of Contents for M4

Reviews:

CAB M4, Operator'S Manual, Page: 34 / 132

Search results

Summary of Contents for M4

Reviews: