2
The HS 150 is a compact unit designed to
dispense rolled self-adhesive label stock. The
machine processes label-rolls of up to 147 mm
width and 240 mm external diameter.
The minimum core diameter is 40 mm.
The unit can be switched between 230 V and
115 V mains power supply.
1. Technical Data
Label Width
19 to 147 mm (0.48“ - 5.79“)
Label Length
15 to 300 mm (0.59“ - 11.81“)
Roll Diameter
max. 240 mm (9.44“)
Label Rewinder
internal or external as required
Core Diameter
min. 40 mm. (1.57“)
Backing Strip Winding Dia.
max. 100 mm (0.93“)
Setting of Label Length
via micro-switch feeler
Counter
Four position LED display
Key
Reset to „0“
Mains Switch
ON/OFF
Mains Supply
230 V 50 Hz fuse 250 mAT
115 V 60 Hz fuse 500 mAT
Operation Temperature
10°C to 35°C
(50°F. to 95°F)
Transport and Storage Temp.
-20°C to +35°C
(-4°F to +95°F)
Humidity
10%to 85% non-condensing
Approvals
DIN VDE 0805 Class 1
Noise Level
60 dB(A)
Power Consumption
approx. 40 W.
Dimensions
188 mm x 250 mm x 240 mm
(7.40“(H) x 9.84“(W) x 9.44“(D))
Weight
Approx. 10 lbs. (4.4 Kg.)
2. Contents of Delivery
1 - HS 150 Half-Automatic Label Dispenser
2 - Mains cable
3 - 2 Fuses 500 mA Slowblow / 250V
(for the usage with 115 V)
4 - Operating Instructions
3. Safety Precautions
• Before switching ON, verify that the mains
supply module is switched to the relevant sup-
ply voltage.
• The HS 150 operates from mains voltage and
therefore may not be opened.
• During operation, the rotating rewinder axle is
freely accessible. Take care when switching
ON. The machine sets in motion immediately
and continues until the first label is ready to be
dispensed.
2
3
1
4
