9
4
Settings
4.1
Setting the Winding Direction
With the setting of the winding direction it is possible to rewind the labels inside or outside.
!
Attention!
Risk of gear defect!
Switch off the device before changing the winding direction.
1
1
ERx/300
ER4/210
Figure 4 Setting the winding direction
Select the winding direction with the switch (1):
ER4/210
ERx/300
Rewinding with labels inside
Rewinding with labels outside
4.2
Adjusting the Guide Axle
Depending on the used printer the guide axle should be adjusted so that the label strip is led horizontally from the
printer to the rewinder.
2
1
1. Loosen the guide axle (1) by turning it
counterclockwise.
2. Move the axle in the guide plate (2) to the
desired position.
3. Fasten the guide axle (1) by turning it clockwise.
Figure 5 Adjusting the guide axle
