8
8
3
Start-Up
3.1
Contents of Delivery
Check the external rewinder for damages in transit and completeness.
Contents of delivery:
•
External Rewinder
•
Clamp
•
2 Rewind Adapters
•
Plate for ER4/210 or Plate for ERx/300
•
Power Cable
•
Documentation
i
Note!
Please keep the original packaging in case the device must be returned.
3.2
Connecting to Power Supply
The rewinder is equipped with a wide range power unit (100-240 V~), so it is possible to use the printer both with a
voltage of 230 V~/50 Hz and with a voltage of 115 V~/60 Hz without changes.
!
Caution!
Risk of injury by rotating parts!
Ensure that the power switch (1) is in position „O“ (OFF) before connecting the printer to a power
supply
!
When switching on the Rewinder starts immediately without or with loose material.
3
2
1
ERx/300
ER4/210
3
2
1
Figure 3 Connecting to power supply
Connect the supplied power cable (3) to the power input module (2) and to a grounded outlet.