background image

2

2

Part.-No.

Description

Type

5540750

External Rewinder

ER4/210

Edition:

 08/2010 - Part.-No. 9008729

Copyright

This documentation as well as translation hereof are property of cab Produkttechnik GmbH & Co. KG. 

The replication, conversion, duplication or divulgement of the whole manual or parts of it for other intentions than its original 

intended purpose  - in particular the procurement of spare parts for products sold by cab - demand the previous written authori-

zation by cab. 

Trademark

Centronics

®

 is a registered trademark of the Data Computer Corporation. 

Microsoft

®

 is a registered trademark of the Microsoft Corporation. 

Windows 2000

®

, 2003

®

, XP

®

 are registered trademarks of the Microsoft Corporation. 

TrueType

TM

 is a registered trademark of Apple Computer, Inc.

Editor

Regarding questions or comments please contact cab Produkttechnik GmbH & Co. KG.

Topicality

Due to the constant further development of our products discrepancies between documentation and product can occur.

Please check www.cabgmbh.com for the latest update. 

Terms and conditions

Deliveries and performances are effected under the General conditions of sale of cab. 

Operator's Manual - Translation of the Original Version 

for the following products

Germany

cab Produkttechnik  

GmbH & Co KG

Postfach 1904 

D-76007 Karlsruhe 

Wilhelm-Schickard-Str. 14 

D-76131 Karlsruhe

T49 721 6626-0 

T49 721 6626-249

www.cab.de 

[email protected]

France

cab technologies s.a.r.l. 

F-67350 Niedermodern 

Téléphone +33 388 722 501

www.cab.de 

[email protected]

España

cab España S.L. 

E-08304 Montaró (Barcelona) 

Teléfono +34 937 414 605

www.cab.de 

[email protected]

USA

cab Technology Inc. 

Tyngsboro MA, 01879 

Phone +1 978 649 0293

www.cabtechn.com 

[email protected]

South Afrika

cab Technology (Pty.) Ltd. 

2125 Randburg 

Phone +27 11-886-3580

www.cab.de 

[email protected]

Representatives in other countries on request.

Summary of Contents for ER4/210















Reviews: