9
4
Charging
!
Attention!
Risk of premature loss of performance!
Charge the battery pack at least every six months also if it is not
used.
i
Notice!
During the battery charging the printer can be used.
Plug the power cable into the power connection socket (7, Fig. 2).
Plug the power cable into a grounded socket.
•
The charging begins.
LED L4 - L6 are switched off. LED L1 and L3 are switched on.
•
When the yellow LED L3 is switched off, the charging process is finished.
If an charging error occurs (LED L2 on) switch off and on the battery pack.
i
Notice!
NiMH batteries show a lazy battery effect.
The batteries gradually lose their maximum energy capacity if they
are repeatedly recharged after being only partially discharged.
The effect can be eliminated by approximately five complete loading
and unloading cycles again.
