background image

10

10

Licences

5.1  Reference to the EU Declaration of Conformity

The battery packs for the EOS series

 

comply with the relevant fundamental 

regulations of the EU Rules for Safety and Health:

• 

Directive 2014/35/EU relating to electrical equipment designed for use 
within certain voltage limits

• 

Directive 2014/30/EU relating to electromagnetic compatibility

• 

Directive 2011/65/EU on the restriction of the use of certain hazardous 
substances in electrical and electronic equipment

EU Declaration of Conformity

 

https://www.cab.de/media/pushfile.cfm?file=2702

 

5.2  FCC

NOTE : This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial 
environment. The equipment generates, uses, and can radiate radio 
frequency and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause 
harmful interference in which case the user may be required to correct 
the interference at his own expense.

Summary of Contents for Battery Pack 2 EOS1











Reviews: