4
4
1.3 Intended Use
•
The Battery Packs are exclusively designed as power supplies for the
cab printers EOS1 mobile and EOS4 mobile. Any other use or use going
beyond this shall be regarded as improper use. The manufacturer/supplier
shall not be liable for damage resulting from unauthorized use; the user
shall bear the risk alone.
•
The device is manufactured in accordance with the current technological
status and the recognized safety rules. However, danger to the life and
limb of the user or third parties and/or damage to the device and other
tangible assets can arise during use.
•
The device may only be used for its intended purpose and if it is in perfect
working order, and it must be used with regard to safety and dangers as
stated in the operating manual.
•
Usage for the intended purpose also includes complying with the operating
manual, including the manufacturer‘s maintenance recommendations and
specifications.
i
Notice!
The complete documentation can also currently be found in the
Internet.
1.4 Safety Instructions
•
The device is configured for voltages of 100 to 240 V AC. It only has to be
plugged into a grounded socket.
•
Only connect the device to other devices which have a protective low
voltage.
•
The device may only be used in a dry environment, do not expose it to
moisture (sprays of water, mists, etc.).
•
Do not use the device in an explosive atmosphere.
•
Do not use the device close to high-voltage power lines.
•
Perform only those actions described in this operating manual.
Work going beyond this may only be performed by trained personnel or
service technicians.
•
Unauthorized interference with electronic modules or their software can
cause malfunctions.
•
Other unauthorized work on or
modifications to the device can also
endanger operational safety.
•
Always have
service work done in a qualified workshop, where the
personnel have the technical knowledge and tools required to do the
necessary work.
•
There are various warning stickers on the device. They draw your attention
to dangers. Warning stickers must therefore not be removed, as then you
and other people cannot be aware of dangers and may be injured.
