8
-
Hang up the axle with material in the unwinder. When hanging up, the
flange with the knurled screw has to be in front.
-
Feed the label strip (14) over the swing arm (7) and the rewind axle (15)
to the printer.
-
Insert the material according to the instructions of the printers operator`s
manual.
-
Align the unwinder to the printer ( vide "Adjusting the Unwinder")
Fig. 7 Unwinding from a Roll with outside wound Labels
15
14
7
Fig. 8 Unwinding from a Roll with inside wound Labels
15
14
7
Insertion of the prepared Winding Axle
NOTICE !
Attend on the different positions of the Unwinder. The position depends on the
wounding of the material rolls as described in chapter "Placing the
Unwinder".