7
-
Slide the flange (3a) on the winding axle (2) so that the attachment of the
flange points to the outside.
-
Align the flange (3a) so that the screw (10) grasps into the groove (11) of
the winding axle (2). Tighten the screw (10) in the flange.
-
Slide the material roll (12) onto the axle until it touches the flange slightly.
-
Push the second flange (3b) with the attachment outside onto the axle
until it touches the material roll. The cardboard core of the material roll
has to be positioned on the winding adapters.
-
Tighten the knurled screw (13) in the flange (3b).
Now you can mount the winding axle on the unwinder:
Fig. 6 Mounting the winding axle
10
3a
12
3b 13
2
11
Retaining Rolls with 3 in ( 76 mm) Cardboard Core on the Winding Axle
NOTICE !
Before mounting the winding axle read this chapter and "Insertion of the
prepared Winding Axle" and attend on the running of the media in dependence
to inside and outside wound label rolls.
NOTICE !
For rolls with 3 in ( 76 mm) cardboard core you have to mount the winding
adapter on the flanges and remove the spring from the winding axle as
described in "Preparing the Winding Axle and the Flanges".