5
Media Loading
Preparing the Winding Axle and the Flanges
There is a spring (8) mounted on the winding axle (2) to guarantee a properly
stability of the unwinding material when using rolls with a 1.56 in ( 40 mm)
cardboard core.
When unwinding from rolls with a 3 in ( 76 mm) cardboard core this spring has
to be removed. For this you have to loosen the two screws (9).
Fig. 3 Preparing the Winding Axle
2
9
8
9
The mounting steps are depending on the cardboard core of the choosen
material roll. Possible cardboard cores are 1.56 in ( 40 mm) and 3 in ( 76 mm).
At first you have to prepare the flanges and the winding axle in dependence to
the cardboard core:
When using material rolls with 3 in ( 76 mm) cardboard core a winding
adapter (4) has to be fixed on each of the two flanges (3) for a properly stability
of the roll. Fix the winding adapters (4) on the flanges (3) by using the screws
(5) included in the delivery content.
Fig. 4 Preparing the Flanges
3
4
5