34
34
7
Configuration
The applicator can be operated in different ways. While the original process stays the same, the operation mode can
be chosen from the printer setup.
The most important setting is the selection between the operation modes "Stamp on" and "Blow on".
Additionally the applicator has different application modes concerning the order of printing and applying within one
labelling cycle.
Stamp on
Blow on
Print/Apply
x
x
Apply/Print
Waiting position top
x
x
Apply/Print
Waiting position bottom
-
x
Table 5
Operation and application modes
Additionally all operating modes can be adjusted by setting different time delays.
i
Note!
For more information about the printer configuration and the function of the keys in the navigator pad
Configuration manual of the printer or
Operator's manual of the printer.
7.1
Method for Changing the Printer Setup
1. Press
menu
button.
2. Menu
Setup>
Labelling >
3. Select and adjust the needed parameters.
4. Return to the "Ready" mode.
Summary of Contents for 4214 Series
Page 1: ...Service Manual 4214 MADE IN GERMANY Stroke Turn Applicator...
Page 39: ...39 9 Drawings 9 2 Pneumatic Drawing Type 4214 Fig 43 Pneumatics type 4214...
Page 40: ...40 40 9 Drawings 9 3 Labeling Position Type 4214 L Fig 44 Labeling position 4214L...
Page 41: ...41 9 Drawings 9 4 Label Position Type 4214 R Fig 45 Labeling position 4214R...
