Blow Applicator with Swing Cylinder
cab - Produkttechnik GmbH & Co KG
7
Installing the Blow Applicator on the Apollo
1
3
1
2
1
4. Installation
Fig. 4a Installation of the Blow Applicator on the Apollo
1. Dismantle the casing of the manifold (
2
) by loosening the screws,
two on the left and one on the right.
2. Fasten the applicator at the front of the
Apollo
using the four
supplied screws (
1
) including the washers.
3. Plug the connector (
3
) of the applicator's electronic system in the
peripheral port of the
Apollo
.
4. Reassemble the casing of the manifold.
