Blow Applicator with Swing Cylinder
cab - Produkttechnik GmbH & Co KG
15
Tuning the Blow Tube
Fig. 5.1e Tuning the Blow Tube on the Apollo
Fig. 5.1f Tuning the Blow Tube on the Hermes
1
4
3
Vertical adjustment
- Loosen the screws (
2
).
- Shift the blow tube (
3
) as required.
- Tighten screws (
2
).
Turn around longitudinal axis (Change the direction of the air
current)
- Hold the slotted screw (
4
) with a screwdriver and loosen the
counter nut (
1
).
- Adjust the tube (
3
) until the air current is aligned with the
dispense edge of the printer.
- Tighten counter nut.
Turn around longitudinal axis (Change the direction of the air
current)
- Hold the slotted screw (
4
) with a screwdriver and loosen the
counter nut (
1
).
- Adjust the tube (
3
) until the air current is aligned with the
dispense edge of the printer.
- Tighten counter nut.
1
2
4
3
