CA CAD-AIRX300, User Manual, Page: 8 / 23

6
Specifications
Model Number CAD-AIRX300
5V / 2.4A
5V / 2A
54W
Lithium-ion
3 Hours
25 Minutes
5 000mAh
3-120psi / 0.2-8bar
80dB (Max.)
ABS+PC+Aluminum Alloy
8.0×1.9×1.9” (203×48×48mm)
18oz (507g)
Power Input
Power Output
Power Consumption
Battery Type
Charging Time
Working Time
Battery Size ( Full Inflator
Capacity)
Pressure Range
Noise Level
Material
Dimension
Weight
· Children are forbidden to use it.
· Do not operate the device when fatigued or under the influence of alcohol or drugs.
Stay alert at all times.
· The storage temperature of the device should not be lower than -10°C or higher
than 45°C.
· If the device will not be used for an extended time, it is recommended to charge it at
least once every three months.
· When the device is not in use, store it in a cool, dry, and dust-free environment.
· Do not use, store or transport the device where flammables or explosives are stored.
Using the device in these environments increases the risk of explosion or fire.
· If there is abnormal noise or the temperature is too high during work, please shut
the device down immediately.
· Before setting the pressure value, please make sure to select the correct pressure
unit, otherwise it may cause accidents such as a flat tire.
· Please use the device in a dry and clean environment, the intrusion of sand and dust
may cause damage to it.
· Always operate the device in a well-ventilated area free of combustible materials,
gasoline, or solvent vapors.
7
Safety Precautions
EN 7