EN 2
2
Charging
2-1 Charging your inflator
2-2 Using the inflator to charge your devices
Connect one end of the included Type C charging cable to the Type-C charging
port of the inflator. Then connect the other end to a USB power source. When
charging, the battery power indicator will flash on the LCD display screen.
This inflator can also be used as a power bank to charge your electronic devices.
1.
Press the
Power button
once to turn the power bank on, and only the
battery power indicator on the display will be lit.
Battery power indication on the LCD display screen
Battery Power Indication
75%~100%
50%~75%
25%~50%
0~25%
Power Level
2.
Directly connect the USB charging cable (USB-Lighting/USB-Micro USB/
USB-Type C charging cable) to the USB port of the inflator, and the other end
to the charging port of your device.
USB Charging cable
(not included)
Type C Charging cable
(Included)
NOTE:
If there is no use within 30 seconds of the power bank being turned on,
it will automatically turn off.
NOTE:
It takes about 3
hours to fully charge the
inflator.
NOTE:
If there is no use within 100 seconds of the inflator being powered on,
it will automatically power off.
3
Powering on / off
To power on the inflator, press the
Power button
for 1 second, and the
display screen will turn on.
To power off the inflator, press the
Power button
for 1 second again.
M
M
M
Summary of Contents for CAD-AIRX300
Page 23: ......