9
Assembly
Step 5
Insert steering rod into gear
box.
Using a Phillips head
screwdriver and wrench,
secure steering rod in place
with bolt and lock nut.
Step 6
Place a washer on left
front axle, then wheel, then
another washer.
Make sure the flat side of
wheel faces out as shown.
Insert (1) cotter pin through
axle to secure wheels.
Using needle nose pliers,
bend back longer end of
cotter pin to secure.
Repeat for right front axle.
insert pin &
bend back
Step 7
Line up notches on hubcaps
with notches on wheels.
Gently press hubcaps to
snap into place.
Step 8
Pair cooler remote.
Refer to instructions on page 12 of the Owner’s Manual.
Step 9
Charge battery for 12 hours.
Refer to instructions on page 10 of the Owner’s Manual.
