3.2.2 Flash Time Setting
Format: 00F #
F=1 ---------0.8s
F=2 ---------1.0s
F=3 ---------1.2s
F=4 ---------1.5s
F=5 ---------1.8s
Explanation: F means the flash time.
Description: For active the hold and divert operating use.
In default setting: F=2 (1.0s)
Example: Set the flash time to 1.2S
3.2.3System Return to Default Setting
Format: 0000 #
Description: The system will restart with the default factory setting.
The command has no effect on the status of enabling/disabling C.O. line.
3.3 Enable/Disable C.O. Lines
You must use these commands according to the actual trunk lines before using this
product!!!
If you don’t enable any C.O. line, the system will consider there is no C.O. line and
doesn’t auto detect C.O. line!!!
3.3.1 Enable All C.O. Lines
Format: 0600#
Description: Enable all C.O. lines
8
Summary of Contents for CPS-Z
Page 1: ......
