※
The differential mechanism is heavy, so it is recommended that two or more people
perform maintenance on it.
41
9-3 Differential mechanism maintenance :
※
Hex wrench 13 x 2pcs
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Refer to 3-3 Controller maintenance to unplug the motor power line.
3.Remove the motor mount screws (M8 x 45L x 4pcs) on both sides.
4.The motor holder on both sides can now be removed.
5.The entire set of the differential mechanism can now be removed.
※
Please follow the above steps in reverse for reassembly and replacement.
9-4 Rear shock absorber maintenance :
※
Hex wrench 17 x 2pcs
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Remove the rear shock absorber upper fixing screw set (M10 x 67L x 1pcs).
3.Remove the rear shock absorber lower fixing screw set (M10 x 45L x 1pcs).
4.The entire rear shock absorber set can now be removed.
※
The left/right rear shock absorber can be disassembled in the same way.
※
Please follow the above steps in reverse for reassembly and replacement.
3.
4.
5.
4.
※
The vibration of the scooter is mainly absorbed by the shock absorber. If the vibrations
are too large, it may be related to the shock absorber.
※
The shock absorber may make abnormal sounds when running. This is mainly due to
the collision of the shock absorber with the plate spring, the frame, or the shaft, the
damage or loosening of the rubber pad, or the deformation of the shock absorber dust
cylinder. Please replace it with a new one.
※
When steering, the incline of the scooter shroud is obviously increased and may even cause
a sideslip. This is mainly because the damping force of the shock absorber is too small
to effectively suppress the compression of the spring. Please replace it with a new one.
※
When reassembling the shock absorber spring, the larger number of turns should face
upwards, and the smaller number of turns should face downward.
3.
100+-10kgf-cm
100+-10kgf-cm
