3
Note: If you have inserted the device properly, Windows will inform you that it has found new
hardware. Wait until Windows completes
the “Found New Hardware” task. It is normal to
hear a short beep each time you insert or remove the device. It is an audible notification
that your computer recognizes the new hardware.
Important
:
Make sure to complete the ejection process before removing the device. If you
remove the device improperly, the modem may be damaged.
4. Turn on your computer and close all applications.
5. Insert the device into your USB port.
6. Your computer will recognize the device and install the Remote NDIS driver
automatically. If the program does not launch au
tomatically, go to “My Computer,”
select ‘Franklin zero CD’ drive and double click the ‘Franklin_installer.exe’ program.
7. The
“Welcome to the Franklin U770 Setup Wizard” screen will then appear. Click
Install
to continue the installation process.
8. Installation of Remote NDIS driver is now complete. Click
Close
to leave the setup
program.