![background image](http://html.mh-extra.com/html/c-scope/evo6000/evo6000_user-manual_478487006.webp)
6 / 32
Getting Started
Your EVO6000 comes with enough charge for you to try it out immediately. To get the best out of
your
we recommend that you charge your EVO6000 fully before you use it. The
USB C
charging port
on the EVO6000 is on the back behind the
waterproof cover
.
Once your EVO6000 is charged you are ready to get started. To assemble your EVO6000 follow the
instructions in the
section. To start detecting take these steps:
Step 1
Press the
power button
to start your EVO6000.
Step 2
Open the EVO6000 menus using the
menu button
Step 3
Use the
up and down buttons
to choose a
program
. Normally
INLAND
will work well.
Step 4
Confirm your selection with the
OK button
Step 5
Use the
up and down buttons
to set the
sensitivity
to the
highest value that you can with the detector not sounding.
Thatʼs it. You are ready to go!
The
section explains how to pair your
wireless headphones
with your
EVO6000. To connect wired headphones, use the
headphone socket
. The
headphone socket
on the
EVO6000 is on the back behind the
waterproof cover
. The
waterproof cover
must be closed if the
EVO6000 control unit is immersed in water.
The
section explains the pre-set
programs
and how to select them.
explains how to tailor the settings on your EVO6000 to your situation or preferences. If you have
chosen some settings which are not working well, selecting a pre-set
program
will get your EVO6000
back to one of our recommended configurations.
The
section has suggestions on how to maximise your detecting
performance.