8 / 32
Assembling Your EVO6000
First attach the
lower stem
to the
search head
. Insert the rubber washers into the recesses either side
of the end of the
lower stem
, slide the
lower stem
and washers into the
search head
with the locking
pin facing backwards, then slide in the bolt so the nut on one end sits in the slot on the
search head
,
then tighten the plastic wing nut so the
search head
no longer moves freely.
The EVO6000 has a
three part stem
so it can be packed into small spaces. Each part of the
stem
slides into the next and clicks into place when it is lined up. Adjust the length of the
stem
so the
detector feels balanced in your hand and is pressing gently on the back of your arm. Twist the
cam
locks
at each of the joints to hold the
stem
firmly in place. To adjust the length of the
stem
, loosen
the
cam lock
then press in the
locking pins
and reposition the
stem
.