5
7.
To reset to factory default
a.
Disconnect power from the unit.
b.
Press and hold the ‘Reset’ button on the PCB whilst powering the unit back up, unit you hear two
short beeps and the LED shines yellow.
c.
Then read two proximity cards, the LED will turn red, system is now back to factory default
d.
Of the two cards read, the first is the manager add card, the second is the manager delete card.
Please note only installer data is restored, user data will not be affected. When reset to factory default, the
two manager card must be re-enrolled.
8. Sound and light indication
Operation Status
Indicator LED
Finger Sensor Light
Buzzer
Reset to factory default
Orange
-
2 short rings
Sleeping
Slow flash in red
-
-
Standby
Slow flash in red
Shine
-
Enter programming
Red solid
-
Long ring
Exit programming
Slow flash in red
-
Long ring
Wrong operation
-
-
3 short rings
Unlock the Door
Green
-
Long ring
Alarm
Quick flash in red
Bright
Alarm
9.
Manager operation
There are 3 ways to add and delete users:
1.
By manager card
2.
By remote control
3.
By manager fingerprint
9.1
By manager card (the most convenient way)
9.1.2 Add fingerprint user
.
Manager add card
.
.
Enter 1
st
user fingerprint twice
.
.
2
nd
user fingerprint twice
.
…
.
Manager add card
.
When adding fingerprints, please input each fingerprint twice, during which the LED shines red and then turns green, meaning
the fingerprint is enrolled successfully. When deleting, only input fingerprint once.
9.1.2 Add card user
.
Manager add card
. .
1
st
card user
.
.
2
nd
card user
.
…
.
Manager add card
.
Fingerprint user ID is 3 – 1000, card user ID is 1001 – 3000. When adding fingerprints or cards by manager card, user ID is
automatically generated from 3 – 1000 or 1001 – 3000. (ID 1 and 2 are for manager fingerprints.)
9.1.3 Delete users
.
Manager delete card
.
.
User card
.
or
.
Fingerprint once
.
…
.
Manager delete card
.
To delete more than 1 card or fingerprint, just input them continuously.
