C.P.Bourg Document Finisher E Series, Operator'S Manual

Page: 67 / 75

Operator Manual
Page 9 - 67
Initial issue: 02/13
Latest revision: -
d - Cassettes replacement with ISP M2000 heads
See "8.1.3 Cassettes replacement with ISP M2000 heads", page 27
e - Wire spool replacement (for Hohner 43/6 S heads)
See
"8.1.4 Wire spool replacement (for Hohner 43/6 S heads)", page 30
f - Wire jam in the stitching head
See "8.1.5 Wire jam in the stitching head", page 31
g - Conveyor
«Exit conveyor not installed»:
Install your conveyor in compliance with the Installation Manual.
« Exit conveyor not connected»:
Connect the conveyor in compliance with the procedure described in the Installation Manual.
«Exit conveyor full»:
A stop switch at the end of the conveyor detects if the conveyor is full. Empty the conveyor.
If the conveyor is installed, connected and empty and if the error message does not disappear,
call the technician.
h - Baffle, cover or door open
Close the baffles, covers and doors. If the error message is not eliminated call the technician.
The message «Interlock» is displayed combined with the message «Door or cover open».
If the message «Interlock» is displayed alone, the rear cover is open.
i- Paper not detected in the stitching machine
For a request «Manual stitching of a set», there is a safety function. The operation is not
allowed if there is no paper in the stitching machine. The “Stitch pulse” function is not dis-
played on the screen.