C.P.Bourg Document Finisher E Series, Operator'S Manual

Page: 30 / 75

Operator Manual
Page 9 - 30
Initial issue: 02/13
Latest revision: -
8.1.4 Wire spool replacement (for Hohner 43/6 S heads)
Note: Oil the felt discs on the wire bow of the Hohner
43/6
S heads.
For Hohner 43/6 S stitching heads
- Remove pin ref.1 and washer ref.2.
- Remove the empty spool.
- Install a new spool ref.3 (pay attention to wire direction).
- Reinstall the washer ref.2 and the pin ref.1 in the shaft groove.
ho hne
r UN
IVE RSA
L
48/5
S
2
3
1