C.P.Bourg Document Finisher E Series, Operator'S Manual

Page: 47 / 75

Operator Manual
Page 9 - 47
Initial issue: 02/13
Latest revision: -
10.2.4 Output conveyor parameter
Press the button "CONVEYOR" to have access to the output conveyor parameters.
The following adjustments are available :
1) Summary screen.
On each screen, the summary screen shows the main parameters entered for stitching,
folding and trimming.
2) Output conveyor advances selection.
Adjust the output conveyor advance (1 to 30) to obtain the space desired between the booklets.
1 = small space
29 = long space
30 = continuous advance
Determine the value through the numerical keypad, Press " V " to validate.
"
V
" Validation of the adjustment parameters entered in the different screens.
"
X
" Cancel the last values entered in the defined job.
1
2