CLIMEXEL HEAT PUMPS MANUAL
pag. 9 di 18
Ver.02
–
2017-08-04
Button
Function
Push and release:
The Set point value is shown in cooling (SetC code) and in heating (SetH code)
Press and hold for 3 seconds:
The Set point value is shown
Press and release in programming mode:
Allows you to access the modification of the parameters
Allows the acceptance of the new parameters
Push and release:
The value read by the sensor is shown
Press and release in programming mode:
Scroll through the parameters
While editing, the parameter value changes
Push and release:
The value read by the sensor is shown
Press and release in programming mode:
Scroll through the parameters
While editing, the parameter value changes
Push and release:
Starts and stops the machine in cooling mode
Push and release:
Starts and stops the machine in heating mode
Push and release:
Entering and exiting the menu, allows you to access the following parameters:
−
ECO / CONFRT mode
−
Display and reset of active alarms
−
Pout parameter: shows the "Step" power level
−
Activation and deactivation of "slave" mode of the "Ser" filtration pump (optional)
−
UPL parameter: factory settings
−
ALOG parameter: factory settings
Press and release in programming mode:
Returns to the previous programming level
2.
CONTROL KEYPAD FUNCTIONS