C.E.C. DA5, Owner'S Manual

Page: 7 / 24

7
POWER button
Press to turn the power ON or OFF. When DA5
is turned on, digital volume ex. "0" (initial setting =
maximum 0 dB) will blink at
④
Sampling frequency
indicator in the display. Approximately 5 seconds later
the display will change to indicate the current function
settings and now DA5 is ready for playback.
FILTER button
Press to select a digital fi lter type "FLAT" or "PULSE".
The selected fi lter type will light up at
①
Digital Filter
indicator. Refer to "Digital Filter" on page 11 for details.
INPUT button
Press to select an input
from USB being connected
with a personal computer,
or COAX, TOS(optical) or
AES(balanced AES/EBU)
being connected with a digital music player like CD
Transport. Pressing the button will change the input in
an order described in the right
fi gure, and the relative
input name will light up at
②
INPUT indicator.
The selected digital input signal is converted and
transferred to the analog and headphone outputs.
The last input has been memorized after power off.
HEADPHONE jack
Headphone output jack for a standard 6.3mm plug.
For using a headphone with 3.5mm mini plug,
purchase a 6.3mm conversion plug from a dealer.
Before using your headphones for listening,
minimize the volume and then insert the
headphones plug into the jack. Excessive
sound pressure from the headphones may
cause hearing loss to your ears.
VOLUME knob
Turn clockwise to increase or counterclockwise to
decrease the headphones volume.
For headphones listening, in addition to this analog
volume operated by the knob, adjust the digital volume
through the remote control unit as well. Refer to "Digital
Volume" on page 9 for details.
Remote sensor
The remote sensor, which receives signals from
the remote control unit, is located at the right side of
the display window. Aim for the sensor when using
the remote control unit. The remote control may
malfunction if there are any obstacles between the
remote control unit and the remote sensor.
Display
①
Digital Filter indicator
A selected digital filter type PULSE or FLAT lights
up. Pressing the FILTER button on the front panel
or D.FILTER button on the remote control unit will
change the filter.
②
INPUT indicator
A selected input USB, COAX, TOS or AES lights
up. Pressing the INPUT button on the front panel
or the remote control, or direct input selector buttons
on the remote control unit will change the input.
③
Digital Signal Format indicator
A digital signal format PCM or DSD is displayed.
This depends on the input signal being played. When
an input without signal or connection is selected,
D/A CONVERTER DA5
INPUT FILTER POWER HEADPHONE VOLUME
PCM FLAT
PULSE
USB COAX
AES TOS DSD
㽲 㽳 㽴 㽵
USB COAX
AES TOS
PCM FLAT
PULSE
USB COAX
AES TOS DSD
Ԙ ԙ Ԛ ԛ
Front Panel Functions