Remote Control
• Avoid exposure of the remote sensor to direct sunlight or other light sources as such exposure can
cause malfunction.
• When operating the remote control unit, pay attention to a free way to the
CD5300
, otherwise
control may not be possible.
• When operating the remote control unit, point the unit’s infrared signal transmitter at the remote
control receiver behind the window on the front panel of the
CD5300
.
• When the batteries are exhausted, the remote commander will not operate the unit. In this case,
replace the batteries with new ones. Use only batteries of same type.
If you should have any further question or problem concerning your unit, please contact your CEC dealer.
The included remote control is for the use with CEC CD transport, CD player, digital to analog
converter and amplifier. This manual just describes the functions concerning the
CD5300.
MEMO, CHECK
and
CLEAR
for programmed playback,
see next page.
TIME
to show 1. elapsed time of the actual track
2. remaining time of the actual track
3. remaining time of the whole CD
1...9; +10; 0
- Direct access play.
Press the numeric button corresponding the required track. The
player starts from the specified track directly.
Example to play track 28: Press
+10
>
+10
>
8.
SHUFFLE:
This function plays the tracks of a CD randomly.
SEARCH:
High speed music search.
SKIP:
Jump to next or previous track.
PLAY / PAUSE
STOP
INTRO:
Plays the beginning of each track for 10 seconds.
1/ALL:
To repeat a CD press
1/ALL
once, for a track twice.
A-B:
To repeat a designated section *).
DITHER, FILTER,
ǻȈ
-FS:
D/A Converter options,
see Front Panel Functions.
*) REPEAT A-B:
1. Press
PLAY
to start playback
2.
Designate the point where the repeat play-back should
start (point A) by pressing
A-B
- The Repeat and A indi-
cators light
3. Press
A-B
again at the ending point
The portion will be played repeatedly until pressing
A-B
again to terminate the function.
Summary of Contents for CD5300
Page 1: ...Owner s M Manual...
